Gel Casting System Solution Set

This set together with Gel casting system,provide a convenient method for electrophoresis gel preparation.Users only to insert the aspiration tubes A\B\C in corresponding reagent bottles respectively.then follow the program of the casting system to get the correspond gel of Tris-HCl system.Compared with the traditional gel preparation method, it has the following advantages:

Easy to use：No calculating,no hand making,just click the desired concentration to get the gel.

No TEMED No bad ordor：There is no need to add TEMED in the gel preparation process, avoiding exposure to foul-smelling toxic reagents.

Excellent separation effect：This set together with gel casting program.Both isocratic and gradient gels can be prepared by this system.

Ship with wet ice; Stored at 2-8℃,valid for 12 months. When Solution C has been be preparad ,it can be stored at room temperature for 1 month,2-8°C for 3 month

1. Add a tube of Solution C powder into a dedicated bottle for Solution C and dissolve it thoroughly.

2. Place solution A, B and C in the corresponding slots on the dispenser and determine the height of the liquid level.

3. Insert the aspiration tubes A\B\C in corresponding reagent bottles respectively(red tube to solution A, green tube to solution B, yellow tube to solution C).

4. Run the corresponding program of the dispenser to see the reagents being pumped into the corresponding pipeline.

1. Be sure to match solution A, B and C with the right tubes.(red tube to solution A, green tube to solution B, yellow tube to solution C).

2. Do not mix solution A/B/C,it may cause the reagent to coagulate.

3. Regularly check the height of the liquid level,If there are any deficiencies, add them in time.

For Research Use Only!