Water Bath Bacteriostatic (1000×)

Cell experiments have high requirements for the cleanliness of the laboratory, and the water bath is commonly used for reagent preheating, cell recovery, etc.. Keeping a relatively clean water environment in the water bath can effectively avoid potential contamination of cells.

This product has a broad-spectrum, efficient inhibition and removal of bacteria, fungi, yeast and other microorganisms. It is mainly composed of two effective antibacterial components, which can not only change the permeability of bacterial cell serous membrane, make bacterial cytoplasmic substances permeate, hinder their metabolism and thus play a antibacterial role, but also inhibit the key enzymes in microbial metabolism, thus inhibiting microbial growth and promoting microbial death. In addition, the product has stable performance, very low toxicity in the recommended concentration, safe dumping, and can replace the traditional antibacterial agents such as copper sulfate that are easy to corrode the surface of the water bath.At low doses, it has a good antibacterial effect and a long duration, which can effectively keep the water bath clean and avoid cross contamination.

Ship at room temperature;Store atroom temperature away from light for24 months.

1. For the first time, it is recommended to wipe the water bath clean with 75% alcohol (optional);

2. Add the water bath bacteriostat (1000 x) to the water bath at a ratio of 1:1000 and mix well (for better bacteriostatic effect, it is recommended to use sterilized pure water for the water bath);

3. Antibacterial effect can be up to 2-3 weeks or even longer. It is recommended to clean the water bath regularly and change the water used in the water bath

1. Gently shake the reagent before use to ensure that each component is uniform.

2. Avoid direct contact with skin and eyes, once contacted, wash immediately with plenty of water.

3. For your health and safety, please wear lab coat and gloves during operation.

For Research Use Only!