Cell Incubator Water Bacteriostatic (1000×)

Cell experiments have high requirements for the cleanliness of the laboratory, and the water tray in the cell incubator or its own water tank is easy to breed bacteria, fungi and other microorganisms in the daily use process, which will affect the daily cell culture. Therefore, maintaining a relatively clean incubator environment is very important for the smooth culture of cells.

This product has a broad-spectrum, efficient inhibition and removal of bacteria, fungi, yeast and other microorganisms. It is mainly composed of two effective antibacterial components, which can not only change the permeability of bacterial cell serous membrane, make bacterial cytoplasmic substances permeate, hinder their metabolism and thus play a antibacterial role, but also inhibit the key enzymes in microbial metabolism, thus inhibiting microbial growth and promoting microbial death. In addition, the product has stable performance, very low toxicity in the recommended concentration, safe dumping, and can replace the traditional antibacterial agents such as copper sulfate that are easy to corrode the surface of thecell incubator.At low doses, it has a good antibacterial effect and a long duration, which can effectively keep thecell incubator clean and avoid cross contamination.

Ship at room temperature;Store atroom temperature away from light for24 months.

1. For the first time, it is recommended to wipe the incubator water tray or the water storage container with 75% ethanol (optional);

2. Add the cell culture incubator water bacteriostat (1000×) to the incubator at a ratio of 1:1000 and mix well (for better bacteriostatic effect, it is recommended to use sterilized pure water for the incubator water);

3. Antibacterial effect can be up to 2-3 weeks or even longer. It is recommended to clean the cell culture incubator regularly and change the water used in the cell culture incubator.

1. Gently shake the reagent before use to ensure that each component is uniform.

2. Avoid direct contact with skin and eyes, once contacted, wash immediately with plenty of water.

3. For your health and safety, please wear lab coat and gloves during operation.

For Research Use Only!