Products Description
The beads pen is an innovative product used with the tissue homogenizer beads grinding system. The grinding beads have been pre-installed in the beads pen, The specified number of beads can be pressed out according to specific needs, which perfectly solves the difficulty of adding beads by tweezers. No longer have to worry about the cross-contamination of beads after opening the cap.
|
Product Name |
Cat. No. |
Specification |
Beads Output Per Time/Pcs |
Volume |
Pen Color |
Beads Color |
| Sterile Beads Pen |
SYM-02B |
Steel Beads 2 mm |
1, 2, 3, 4, 5 |
20ML 90g (2000 pcs) |
Blue |
Silvery |
|
SYM-03B |
Steel Beads 3 mm |
1, 2, 3, 4 |
20ML 90g (600 pcs) |
Blue |
Silvery |
|
|
SYM-04B |
Steel Beads 4 mm |
1, 2, 3 |
20ML 90g (400 pcs) |
Blue |
Silvery |
Products Features
1. Simple operation, easy to add beads, and improve work efficiency;
2. The sizes 2 mm, 3 mm, and 4 mm of zirconia beads and steel beads both are optional;
3. Number and color identification, which is convenient for distinction and operation;
4. Bead Pen Volume: 20 ML.
Precautions
1. Before the operation, remove the sealing plug at the tip of the nozzle;
2. If there is an error in the number of beads, you can press button 1 (or other numbers) to replenish beads;
3. Press the button to the bottom and return to the highest point when it bounces back. If it does not return to the highest point, please push the button back to the highest point with your thumb;
4. If the number of beads is not accurate during use, please shake the beads pen up and down, then press it again to release the beads.
